2022 Fischer System Manual en i V3.2

your selection by pressing the “i” button twice in quick succession. You will now return to the main view.

Once you have set all the support levels, con firm the settings by pressing the “i” button twice in quick succession. You will now return to the main view. When setting the strength of sup port, the percentage (i.e. the sup port strength) must be set to a high er value in higher support levels than in lower levels.

Background lighting The intensity of the display background light ing can be set at five levels. Select the desired brightness from 1 to 5 by using the “+” or “-” but tons on the display. The higher the number, the brighter the lighting. Confirm your selection by clicking the “i” button twice in rapid succession. You will now return to the main view.

Service notification Your system offers the possibility to activate a no tification when an inspection needs to be carried out. Use the “i” key to go to the “nnA” display. Use the “+” or “–” button on the display to select “0” or “1”. Selecting “1” activates the service notifica tion, and the message “Service” will appear on the display after every 5,000 kilometres travelled. Confirm your selection by clicking the “i” button twice in rapid succession. You will now return to the main view.

Brightness sensor Your display has a brightness sensor on the back. In the dark, it automatically switches on the dis play lighting as well as the permanently installed lighting system, if available. You can choose at which level of darkness the lighting is to be acti vated. Select the desired sensitivity level with the “+” or “-” buttons: 0 = Brightness sensor is off, 1-5 brightness sensor is on. The higher the number, the more sensitive the sensor and the earlier the lighting system will be activated. Confirm your selection by clicking the “i” button twice in rapid succession. You will now return to the main view.

Switch-off time Your pedelec provides an automatic switch-off function. This switch-off function is activated if the pedelec has not been used for some time. The default is 5 minutes. The time to switch-off can be adjusted between 1 and 9 minutes. Use the “+” button or “–” button on the display to select the desired switch-off time and confirm

You will find more information in the settings. These cannot be changed or can only be changed by a specialist bicycle retailer.

19