2020 EN FISCHER SYSTEM MANUAL

2. ODO = Total kilometres 3. Trip = Trip counter 4. Speed unit

Control unit Functional overview and operation

Error No.

Error description and solution

Motor overloaded Solution: Reduce the load (e.g. steep incline, high additional load or trailer). Pedal more strongly. If the motor has failed completely, it requires approxi- mately 5 minutes of cool-down time. Also check that all visible motor con- nectors are 100% secure. If nothing works, contact our service hotline. Motor or motor cable short-circuit 1 Solution: Check the cable to the motor for possible breakage. Contact our service hotline. Communication error Solution: Detach the plug-in con- nection of the display and attach it again. Repeat this step at least twice. If nothing works, contact our service hotline.

21

5. Speed or km/hr (depending on the setting) 6. The small headlamp lights up when you acti- vate the display lighting. If pedelec lighting is available, it is switched on at the same time, depending on the model. 7. Watt display (100 – 500) 8. Range 9. Bluetooth 10.Heart rate meter 11.USB charging function 12.Error codes 13.Motor support levels 14.Push assistance Operation Switching the display on/off Keep the “MODE” button pressed to switch the display on/off. If you should forget to switch off the display, it will switch itself off automatically after 10 min- utes. Switching the light on and off Press the “+” button for 2-3 seconds to switch on the lighting. Repeat the process to switch off the light again. Speed display Keep the “MODE” button pressed and then press the “+” button to change between the current speed, the average speed and the maximum speed.

1

1 “+”-button 2 “–”-button 3 MODE

2 3

23

Display Functional overview

30

1

2 3

4

5

14

6

LCD 900 display with control unit

7

12 13

11

10

9

8

1. Speeds: • Speed: Current speed (default setting of main display)

• AVG Speed: Average speed • MAX Speed: Maximum speed

30