2022 Fischer System Manual en i V3.2

Error codes for Bafang displays

Error

Description

Troubleshooting

07

Overvoltage protection

1. Remove the battery. 2. Replace the battery. 3. If the problem persists, please contact the Fischer Service. 1. Switch off the system and let the Pedelec cool down. 2. If the problem persists, please contact the Fischer Service. 1. Switch off the system and let the Pedelec cool down. 2. If the problem persists, please contact the Fischer Service. 1. Switch the system off and on again. 2. Check that the magnet attached to the spoke is aligned with the speed sensor and 10 mm - 20 mm away from it. 3. Check that the speed sensor connection is correctly connected. 4. If the problem persists, please contact the Fischer Service. 1. Check that all connections are connected correctly. 2. If the problem persists, please contact the Fischer Service. 1. Check that the speed sensor plug is connected correctly. 2. Check the speed sensor for signs of damage. 3. If the problem persists, please contact the Fischer Service.

10

The temperature inside the engine has reached its maximum safe value.

14

The temperature inside the controller has reached the maximum safe value.

21

Error with the wheel speed sensor.

25

Error with the torque signal or torque sensor . Error with the speed signal or torque sensor .

26

27