2022 Fischer Operating Instructions en V3.2

On bikes with rear wheel suspension the seat post must never touch the suspension element, even when the rear suspension is compressed!

Changing the position of the stem al so changes the position of the han dlebars. You should always be able to safely reach and use grips and controls. Please ensure that all cables and lines are long enough to allow you to turn the handle bars in every possible way. For detailed infor mation about your stem, please read the oper ating instructionssuppliedby themanufacturer.

For detailed information, please read the operating instructions sup plied by the manufacturer.

Only have work on the handlebar and stem performed by experts or Fischer customer service technicians!

Stem Twist With the Stem Twist, you can bring the handlebar into riding position in just a few steps. 1. Open the quick re lease lever 1 .

Position / adjusting Various stem models are used on your pedelec: Quill stem

A-head stems

1

Height change possible as follows: • Exchange of fitted spacers under or above the stem • Turning of the stem

STOP

2. Turn the handle bars 90 degrees until the locking mechanism is visible and audi bly clicks and the safety bolt 2 on the stem is visible.

2

90°

• Exchange of the stem Adjustable A-head stem

Height adjustment possible

Never pull the stem out further than the maximum mark on the tube frame! If there is no maximum mark, then at least 7.5cm of the stem must always remain inside the fork tube.

Adjustment of stem tilt possible

* see page 39

21