2020 EN FISCHER SYSTEM MANUAL

Background lighting This is the first settings option. The number “1” flashes. You have a choice between: • 1 = Weak display lighting • 2 = Moderate display lighting • 3 = Bright display lighting Use the arrow keys to adjust the value as de- sired. You can move on by using the “MODE” button.

The standard setting is “25”. This means that the motor is pushing with 25% of its total power. You can increase this value in steps of 1% to a maxi- mum of 50%. You can move on by using the “MODE” button.

Hold both arrow keys at the same time for approx. two seconds to get to the second menu level. Now again keep both arrow keys pressed for ap- proximately two seconds. You are now in the extended menu. Support levels First, you can select the number of support lev- els. The standard is five levels, but you can also have three, seven or nine levels. The more steps you configure, the finer the motor support can be graded. This makes the motor more efficient and thus improves the battery range. You can configure the individual steps after pressing the “MODE” button.

This function is not available for pe- delecs with a central motor. Just change the gear on your gearbox to regulate the strength of the push assistance. Lower gear = Stronger push assistance. Start-up strength The start-up strength of the motor can be set to four levels: • 1 = 100 %

Push assistance

The pushing aid function works to assist you if you, for example, have to climb a steep ramp from an un- derground car park or underpass. Do not use it to ride the bike. The push assistance is not a start- up support! If you activate your push assistance under a load that is too heavy, your motor will start to jerk or even perform an emergency shut-down!

• 2 = 90 % • 3 = 80 % • 4 = 70 %

The default is level 1. Selecting a lower level has a positive effect on the range of the battery and its service life. Keep the “MODE” button pressed to leave the menu.

24