2020 EN FISCHER SYSTEM MANUAL

You can change the current selection as follows: 1. Move the joystick upwards or downwards. 2. Another option can be marked with a vertical movement of the joystick. 3. You activate the marked option by press- ing the joystick. The change is immediately adopted. 4. Change to the next page by pressing the joy- stick towards the left or right side. Human Power Shows the current performance of the driver in watts.

Tour distance / Reset The values for the distance covered, for the av- erage speed and the highest speed are deleted and set to “0”. Push the joystick T3 downwards. The values for the tour are set to “0” by pressing the joystick.

Tour distance Shows the distance covered since the value had been reduced.

Additional pages are associated with this page: Tour distance / Average speed Show the average speed on the distance cov- ered.

Total distance Shows the total distance covered with the pedelec.

Residual range Shows the remaining range using the currently selected support level.

Tour distance / Maximum speed Shows the highest speed on the distance covered.

19

Made with FlippingBook Publishing Software