2019_EN_FISCHER_SYSTEM_MANUAL_web[1]

Battery information is only shown after three minutes of cycling.

Push assistance activated

Battery charting state display

Connection via Bluetooth You can show all relevant data of your pedelec on your smart phone by using the Bluetooth con- nection. Load the “Tahuna” APP onto your phone for this purpose. It is available on AppleStore and PlayStore. Heart rate measurement Your current heart rate is also shown through the Bluetooth connection. A chest strap must be worn in order to measure the heart rate. Attach the chest strap in order to connect the display with the chest strap. Press all 3 buttons of your operating unit simultanously for approximately 5 seconds. The display changes while you keep the buttons pressed. Keep pressing the buttons until the standard display reappears and your heart rate is shown.

Select motor support You can select the strength of the motor support by pressing the “+” or the “-” button. After switch- ing on the display, level 1 is selected by default.

USB charging function You have the option of using the USB charger socket to charge your smart phone.

Charging via a USB socket

Motor support level

Watt display The motor power appropriate for the support level selected is also shown in watts.

Do not charge your smart phone while riding! Do not insert the charg- er cable while riding!

Displaying the remaining range The calculation of the remaining range is based on the currently selected motor support level. Changing the strength of the support also chang- es the remaining range.

Watt display Display of battery charging state

The battery charging state is shown with 5 bars. 5 black bars mean that the battery is fully charged. The battery must be recharged at the latest when no more bar is shown and the frame of the dis- play flashes.

Display Bluetooth + heart rate

Displaying the remaining range

31