2019_EN_FISCHER_SYSTEM_MANUAL_web[1]

7. Press the “MODE” button to switch between “trip meter” (TRIP), “odometer” (ODO) and range (DST TO GO “km range”). 8. After confirming your input by briefly pressing the “MODE” button, you get to the next menu level. 9. Keeping the “MODE” button pressed for ap- proximately 3 seconds while being in the menus moves you one menu level back or makes you leave the menu. This works at any place in the menu. Display Functional overview

6. Main display • The current speed or other menu points are shown here, depending on the set- ting. 7. Mode • The current motor support mode or push assistance (WALK) is shown, depending on the setting. 8. Maintain • Only pops up in the event of a fault. 9. DST TO GO • If this is shown, the range in km is dis- played to the left of it. 10.Error code or range display 11.”Error” is only shown here in the event of an error. “Watt” is only shown when requested. 12.PAS • The currently set PAS (motor support strength) is shown here. 13.The small headlamp lights up when you activate the display lighting. If pedelec lighting is available, it is switched on at the same time, depending on the model. 14.Speeds:

Control unit

There are two different external op- erating units. Both have three but- tons with the same functions and

only differ in their external appearance.

Functional overview and operation

1

1 “+”-button 2 “–”-button 3 MODE

1

3 2

2

3

1

3 2

4

5 6

14

1. Keep the “MODE” button pressed in order to switch the display on/off. 2. The “+” and “-” buttons can be used to change the support levels, to select menus or to change values. 3. In standard mode, hold the “+” button and the “MODE” button at the same time to switch the display lighting on/off. 4. In standard mode, hold the “-” button and the “MODE” button at the same time to reset the trip counter (TRIP). 5. Keep the “-” button pressed to activate the push assistance. Warning: This is NOT a start-up support. 6. Keep the “+” button pressed to switch be- tween current, average and maximal speed.

7

8

13

9 12 12 12

• Speed: Current speed • AVG Speed: Average • MAX Speed: Maximum Settings

1. Charge status of the battery 2. Trip: Trip counter / ODO: Total kilometres 3. General: Display of kilometres of the day or total kilometres In the settings menu: Information on the cur- rent menu 4. Trip 5. Speed

Do NOT change the settings while riding your pedelec.

26

Made with FlippingBook - Online catalogs