2019_EN_FISCHER_SYSTEM_MANUAL_web[1]

“MODE” button, which moves you to the next level. This continues until the last level has been reached and confirmed.

Hold both arrow keys at the same time for approx. two seconds to get to the second menu level. Now again keep both arrow keys pressed for ap- proximately two seconds. You are now in the extended menu. Support levels First, you can select the number of support lev- els. The standard is five levels, but you can also have three, seven or nine levels. The more steps you configure, the finer the motor support can be graded. This makes the motor more efficient and thus improves the battery range. You can configure the individual steps after pressing the “MODE” button.

Battery voltage and capacity The correct battery voltage in Volt must be pro- vided to ensure that the battery charge display works correctly. You have a choice of 36 or 48 volts (the upper number flashes). The voltage of your battery is shown on the sticker attached to your battery among other places. When you have selected the voltage, confirm it with the “MODE” button. A selection of capacities is now automatically provided, depending on the battery voltage set. The same applies here: The battery capacity is specified in “Ah” and this value is also shown on the sticker of your battery. This setting is neces- sary to show the correct battery range on your display at a later time.

This function is not available for pe- delecs with a central motor. These settings can unfortunately not be performed, due to the specific type of motor controller used. Wheel size The next parameter to select is the wheel size. This is required to ensure that the speed dis- played as well as the kilometres ridden are cor- rectly represented. You have a choice between 38-622 | 42-622 | 47-622 | 27.5" | 26"/47-559. The size of your wheel is shown on your tyre. For trekking bikes 38/42-622 | City bikes 47-622 | MTB 27.5“ |26“ /47-559.

Starting with level 1 (see number in the middle), you will be asked how much support in % you want to get at the level shown. The bottom field shows a “from-to” recommen- dation. The setting is made in 1% steps and is in each case confirmed by pressing briefly on the

24

Made with FlippingBook - Online catalogs