2019_EN_FISCHER_SYSTEM_MANUAL_web[1]

Error code Error description and solution 26

Error code Error description and solution 60

Error code Error description and solution 80 Faulty motor parameter

A software reset has been carried out. Switch the electrical system off and on again. If the problem persists, contact our service hotline. Detecting overcurrent in the motor Reducing the strain on the motor by pedalling less or by reducing the support level. Fault in the motor rotation Switch the electrical system off and on again. If the problem persists, contact our service hotline. Short circuit in the motor Switch the electrical system off and on again. If the problem persists, contact our service hotline. Overheating of the motor Reducing the strain on the motor by pedalling less or by reducing the support level. The software has corrected an error in the motor rotation. No motor movement detected although a current > 2A was measured. Switch the electrical system off and on again. If the problem persists, contact our service hotline.

Interruption of the data exchange on the CAN BUS. Check the cable and the plug-in connections of all components of the e-bike system. Force exerted on the pedal not within the valid range. Switch the electrical system off and on again. If the problem persists, contact our service hotline. Turning of the pedals is not detected. Switch the electrical system off and on again. If the problem persists, contact our service hotline. Force exerted on the pedal is not detected. Switch the electrical system off and on again. If the problem persists, contact our service hotline. The connection to the pedal force sensor is faulty. Switch the electrical system off and on again. If the problem persists, contact our service hotline. Errors were detected in the data Switch the electrical system off and on again. If the problem persists, contact our service hotline.

Switch the electrical system off and on again. If the problem persists, contact our service hotline. Speed signal not detected Ensure that the spoke magnet is correctly positioned relative to the speed sensor. The program has been manipu- lated Switch the electrical system off and on again. If the problem persists, contact our service hotline. Error in the program sequence Switch the electrical system off and on again. If the problem persists, contact our service hotline. Faulty motor parameter Switch the electrical system off and on again. If the problem persists, contact our service hotline.

81

40 / 41

70

82

42

71

83

43

72

84

44

73

45

46

74

21