2019_EN_FISCHER_SYSTEM_MANUAL_web[1]

Removing the battery 1. Turn off the electrical power unit system be- fore removing the battery.

Installing the battery 1. For the battery to be inserted, the lock must be unlocked. You can lock and unlock the bat- tery by turning the key provided.

When inserting the battery, ensure that it fits appropriately into the guide structure, as safe locking is otherwise not assured. For correct insertion, the battery must be inserted and locked from the rear of the casing as far as it will go. Without contact with the battery, the electric drive of your pedelec will not work.

2. Insert the key into the battery lock. Turn the key anticlockwise towards the left. The key must be held in this position in order to re- move the battery!

Battery lock

2. Slide the battery along the rail track as far as possible into the connection device.

Pull out of rack

Frame battery

Battery lock 48V battery

The 36V battery latches audibly and closes au- tomatically. Additional locking is not necessary or not possible. The 48V battery does NOT latch. The battery must therefore be inserted with sufficient force up to the final point, where it is in contact with the limit stop. Warning: It is essential to secure the battery before each drive by inserting the key, turning it clockwise and removing it.

3. Remove the battery from its holder. Removing the battery requires some force.

Hold the battery tightly as it is heavy

10